.png){kind=small}
Dust Removal: Your candles may develop a light layer of dust, known as "bloom," due to the natural waxes and dyes. Simply wipe the candles with a soft cloth to restore their appearance. Wick Trimming: Trim the wick to 5mm before each lighting. Burnin
Wick Trimming: Trim the wick to 5mm before each lighting. Burning Surface: Always burn on a flat, level surface. Foreign Materials: Keep the candle free of any foreign materials. Extinguishing Flame: Use an appropriate tool to extinguish the flame. E
Prepare Your Vessel: Select a clean, non-flammable, and heat-resistant vessel at least 7 cm wide. Carefully pour in pearl candle wax, creating a layer of at least 5 cm. Gently shake to ensure a level surface. Set the Wick: Insert a Hueseeka wick into
Heat Sources: Do not place near flames or other heat sources. Water Exposure: Avoid leaving near or in water to prevent damage to the battery compartment and internal wiring. Weather Conditions: Do not leave LED candles outside in wet weather conditi
Inserting the Candle: To avoid damage to both the candle and the glass cylinder, do not drop the candle into the glass. Hold the candle by the wick and slowly lower it into the glass at a 45-degree angle. Heat Sources: Do not place near flames or oth
Inserting the Candle: To avoid damage to both the candle and the glass cylinder, do not drop the candle into the glass. Hold the candle by the wick and slowly lower it into the glass at a 45-degree angle. Removing the Candle: For easiest removal, bur